Plugs
Every set contains a black and a red marked plug.
|
|
Banana plug BS6 for wire up to 4 mm²
|
Enlarge |
Banana plug for wire up to 4 mm².
Also accepts side-entry banana plugs for stacking.
The plug is 36 mm long.
Price per pair
(Order No str-bs2) EUR 1,60  excl. VAT: € 1.34 / $ 1.53
|
|
|
Highly elastic banana plug BS10 for cables with up to 4 mm2 wire
|
Enlarge
Enlarge |
Banana plug for wire up to 4 mm². To open up the plug the three parts (split is roughly in the centre of the grip) need to be twisted.
The wire is then inserted from behind. Stacking is not supported.
The plug is 49 mm long and has a diameter of 11 mm.
Price per pair
(Order No str-bs10) EUR 3,90 excl. VAT: € 3.28 / $ 3.74
|
|
|
Banana plug BS30 for wire up to 30 mm²
|
Vergrößern |
Banana plug for wire up to 30 mm².
To open up the plug the two parts need to be twisted anticlockwise.
The wire is then inserted through the visible opening on the side.
To close the plug just twist the two parts clockwise.
Also accepts rear-entry banana plugs for stacking.
The plug is 48 mm long and has a diameter of 10.8 mm.
Price per pair
(Order No str-bs30) EUR 3,90 excl. VAT: € 3.28 / $ 3.74
|
|
|
Banana plug BS31 for wire up to 30 mm²
|
Vergrößern |
Banana plug for wire up to 30 mm².
To open up the plug the two parts need to be twisted anticlockwise.
The wire is then inserted through the visible opening on the side.
To close the plug just twist the two parts clockwise.
Also accepts rear-entry banana plugs for stacking.
The plug is 50 mm long and has a diameter of 10.8 mm.
Price per pair
(Order No: str-bs31) EUR 3,90 excl. VAT: € 3.28 / $ 3.74
|
|
|
Gold plated banana plug for wire up to 6 mm²
|
 |
Gold plated banana plug for wire up to 6 mm².
To open up the plug the two parts (split is roughly in the centre of the grip) need to be twisted anticlockwise.
The wire is then inserted through the rear opening. To close the plug just twist the two parts clockwise.
The plug is 39 mm long and has a diameter of 10 mm.
Price per pair
(Order No str-bs6) EUR 3,60 excl. VAT: € 3.03 / $ 3.45
|
|
|
Gold plated banana plug BS10 for wire up to 10 mm²
|
 |
Gold plated banana plug for wire up to 10 mm².
To open up the plug the two parts (split is roughly in the centre of the grip) need to be twisted anticlockwise.
The wire is then inserted through the visible opening on the side.
To close the plug just twist the two parts clockwise. Also accepts rear-entry banana plugs for stacking.
The plug is 48 mm long and has a diameter of 10.6 mm.
Price per pair
(Order No str-bs8) EUR 4,90 excl. VAT: € 4.12 / $ 4.69
|
|
|
Quality hint: Beryllium Copper gold plated Banana Tube LS4
|
 |
The 4 mm, 24 ct gold plated Banana Tube shown on the left is one of the best connectors we know.
The wire is attached by feeding it through the opening on the left of the connector and then soldered.
Any banana socket accepts this connector. Also accepts rear-entry plugs of the same type or banana plugs for stacking.
One disadvantage, however, is that it may break by stepping on it.
Price for 1 pcs
(Order No str-LS4) EUR 1,20 excl. VAT: € 1.01 / $ 1.15
|
  |
Insulating sleeves for the Banana Tube
The finished connector looks like in the picture on the right.
What you need is the Banana Tube (pictured above) and the insulating sleeve (pictured left below).
After the wire has been soldered to the Banana Tube, the insulating sleeve has to be pushed over the tube from the front and locked by folding down the lever.
Price per unit
(Order No MC-222060-21) EUR 0,50 excl. VAT: € 0.42 / $ 0.48 black
Price per unit
(Order No MC-222060-22) EUR 0,50 excl. VAT: € 0.42 / $ 0.48 red
Price per unit
(Order No MC-222060-23) EUR 0,50 excl. VAT: € 0.42 / $ 0.48 blue
Price per unit
(Order No MC-222060-24) EUR 0,50 excl. VAT: € 0.42 / $ 0.48 yellow
Price per unit
(Order No MC-222060-25) EUR 0,50 excl. VAT: € 0.42 / $ 0.48 green
Price per unit
(Order No MC-222060-29) EUR 0,50 excl. VAT: € 0.42 / $ 0.48 white
|
 |
Ready made cables are also available for e.g. labs, schools with either 2 mm or 4 mm tube (like above) including holder.
For example ready made measuring cables in red, blue, white, black, yellow, green with highly flexible wire 1mm² and with 0.003 Ohm contact resistance
Price per unit
(Order No MC-280055-025) EUR 5,20  excl. VAT: € 4.37 / $ 4.98 25 cm probe lead
Price per unit
(Order No MC-280055-050) EUR 5,40 excl. VAT: € 4.54 / $ 5.17 50 cm probe lead
Price per unit
(Order No MC-280055-075) EUR 5,70 excl. VAT: € 4.79 / $ 5.46 75 cm probe lead
Price per unit
(Order No MC-280055-100) EUR 6,20 excl. VAT: € 5.21 / $ 5.94 100 cm probe lead
Price per unit
(Order No MC-280055-150) EUR 6,70 excl. VAT: € 5.63 / $ 6.42 150 cm probe lead
Price per unit
(Order No MC-280055-200) EUR 7,20 excl. VAT: € 6.05 / $ 6.90 200 cm probe lead
|
|
|
Female banana jacks / nuts
|
Enlarge |
Price per set
(Order No str-einban-r) EUR 2,90 excl. VAT: € 2.44 / $ 2.78 female banana jack, red (2 parts)
Price per set
(Order No str-einban-s) EUR 2,90 excl. VAT: € 2.44 / $ 2.78 female banana jack, black (2 parts)
Price per set
(Order No str-einban-p) EUR 5,80 excl. VAT: € 4.87 / $ 5.56 Set black and red (4 parts)
|
|
|
WBT Connectors
It's certainly debatable whether a lot of money should be spent on connectors, especially for connecting home-made speakers.
Our high-end customers are definitely prepared to go for the best.
WBT connectors in particular are very popular with this community.
These connectors don't have much of a competition and are often used for high-end ready made cables.
For these we recommend high quality cables.
|
|
|
RCA Plugs C1
|
Enlarge |
RCA Plugs Packs of 2, with red and black colour-coded rings
Technical Facts - Colour: chrom
- Cable inlet: Ø 5-7mm
- Strain relief: self-adjusting clamps
Price per pair
(Order No str-cinch-1) EUR 3,30 excl. VAT: € 2.77 / $ 3.16
|
|